The usage of PET bottle

PET bottle has attracted pharmaceutical packaging  factory at present, whether PET bottle is just used in pharmaceutical industries?

plastic medicine liquid bottle

In the PET packaging, the best application field is CSD, like cock and sprite. Incomplete statistics of CSD bottles accounted for 1/3 of the total number of PET bottles. In 1998 alone, China accounted for 57.4% of PET bottles in CSD packaging. As early as in 1995, Japan's condiments are has more than 30000 tons, accounting for 13% of the total consumption of PET bottles. The data showed that Japan's in 2000 sales of PET bottles from 220 million to 250 million. In five years from 1995 to 2000, PET bottle rose from 15% to 36% in Germany, beverages, beer product is more widespread use of PET bottle blow molding technology, the single transient can be up to 1200 bottles/PET beer production mold.

250ml transparent PET bottle A156 

PET bottle has not only superior performance, but also has excellent environmental protection energy saving characteristics. The energy consumption is only 41% to 64% of glass bottles. If recycled, the energy consumption can be reduced by about 50%. If the base of China's beer production more than 20 million tons in 2000, around 25 billion to 30 billion beer bottles only (including recycled), even partly replace, by 2005, demand of PET bottle in China will reach 600000 to 650000 tons.

What Factors Affect the Transparent of PET Bottle?

PET bottle is the representative of the transparent pharmaceutical packaging, which is the most extensive plastic packaging. PET plastic oral liquid bottles can be used for edible oil, spices, alcohol, drugs, cosmetics, liquid detergent and other chemical product packaging. However, there have some factors influences on transparent PET bottles.

transparent PET bottle 

First is that the moisture content of materials. Raw materials must be dried before producing. Mostly the drying temperature is 160 ℃, it will not become wet if always staying in the air for dried materials.

Second is the parison wall to save. Parison wall to save will affect transparency of bottle production directly. The reason is that the size of the wall to save directly affect the bottle preform mold cooling process under the condition of low temperature, can increase some appropriate deposit the wall, and vice will wall thickness decrease.

Third is the effect of melt flow rate. When the bottom of the parison of burning mouth more trickle way more narrow, Melt flow by scratching at the mouth of the speed will increase, this will promote is not far from scratch mouth obvious crystallization phenomenon, which appear on the outside of produce a opacifying layer.

Fourth is the melt viscosity, at the same melting temperature will directly affect the melt viscosity of the resin.

Oral Liquid Bottle Made of Plastic

Oral liquid means combined with a single dosage packaging bottle, while multidoses give priority to PET bottle, which is developed based on medical broth, injection of new dosage forms, it's package is plastic oral liquid bottle. it’s packaging is changed from medical glass bottle to PET pharmaceutical plastic bottle. The advantage of oral liquid including small doses, absorb quickly, stable quality, easy to carry and use, easy to save etc. The mainly feature is that suitable for industrialized production. Some of the oral liquid can be used for emergency medicine of traditional Chinese medicine, just like Four Decoction oral liquid, Silver Yellow oral liquid. So in recent years, many capsules and pills changed into oral liquid to make it become one of the faster growing formulations in pharmaceutical preparations.

 

PET medicine bottle

Anyway, whether China or the world has paid more attention to pharmaceutical packaging especially on oral liquid. Which is packaged by plastic oral liquid bottle. PET pharma oral liquid bottle is easy to shape with high transparent and light quality. Strength and elasticity are significantly higher than other plastic materials, which can absorb the impact of the big but not broken, the most suitable for thin wall, qualitative light, intensity is high drug packaging bottle. Medicinal PET bottle has good gas barrier property.

 

Syrup bottle

Veterinary Disposable Plastic Syringe

Veterinary disposable plastic syringe is used in farm or veterinary factory. Plastic syringe can contain the precision placement and dosing of paste, liquid, and gel formulations, which is convenient for people to use.

veterinary plastic syringe

Veterinary disposable plastic syringe has six size including 8ml, 10ml, 13ml, 20ml, 30ml, 60ml. They are white color and also can be produced in different colors. 30ml and 60ml dose control syringe without needle usually used in pet oral paste syringe, other veterinary syringe with needle mainly used in intramammary syringe and cockroach killing syringe.

  

instramammary syringe

 Veterinary disposable plastic syringe made of PE raw material, PE veterinary syringe has excellent low temperature, the weak acid alkaline solution (pH 5-9) at room temperature. But the anti-oxidant corrosion, in the presence of the atmosphere, sunlight and oxygen, is ageing and crispy.

How to Create Business Brand Through Packaging?

Recently, many environmentalist called on foreign winemakers to fill cartons and new plastic bottles due to safe, environmental protection, economics.However, most winemakers don’t accept. Because glass wine bottle is one inimitable symbol for wine, so they would like use glass bottle all the time. Factually, many famous wine attract people with their special bottle shape. So why another packaging can’t bu used for them? The bottle is the best brand, and think about the packaging of the PET bottles of our country's various pharmaceutical factories.

150ml Plastic amber oral liquid bottle A200

The primary pharmaceutical packaging location is that most people can distinguish beer, grape or cognoc for just glimpse. After many years of precipitation, these visual symbols with strong differentiation and recognition have established a corresponding relationship with the taste, quality and brand history of the wine, and have been implanted into the heart of the wine lovers.

PET liquid bottle and sold comtainer

China is focused on health care, which makes pharmaceutical factories create brank. However a excellent creating brand way is ignored from pharma PET oral liquid botte. It is hoped that in the near future, the use of Chinese PET bottles will have better development and breakthrough.

How to test plastic infusion vials?

Plastic infusion vial need accrate quality test after producing, usually testing from surface and sizes to meet the standard of international productio, which can also keep safe during the using time.

plastic injection vial

The testing way of plastic infusion vial is that by cutting the measuring area of the symmetrical part, the measuring tool can enter the detection point of the various parts of the bottle body for the round vaccine bottle. At the same time he thickness of the plastic bottle, shoulder, body thickness, the thickness of the bottle at the bottom of the symmetric part of the strict measurement, and record the maximum and minimum values, contrast bottles product design drawings, inspection dimension tolerance is within the standard requirements.

 100ml large plastic injectionn vial

 The outdiameter testing of plastic infusion vial, the way is that use vernier caliper measuring surface contact with the largest outer diameter of the bottle, tightening the vernier caliper, then rotate it 360 plastic bottles, and record the size of the maximum and minimum values, the error should be controlled in 0.1mm. The inner diameter error also shoud be controlled in 0.1mm.    

The surface test of plastic infusion vial mainly includes the overall shape of the bottle, the surface tone, the gloss, the quality of appearance and so on. But from the overall to requirement of plastic bottles, the appearance quality shall be uniform ivory color, can not have clear off color, surface should be smooth and flat, there is no deformation and obvious scratch, there is no sand holes, oil, air bubble, bottle parts should level off is smooth.

Through all above testing, plastic infusion vial meet international requirement.

How Does Veterinary Oral Gel Syringe Manufacturer Inspect Syringe Quality?

Veterinary oral gel syringe is a new medicine packaging container with high technology for injectant and injection. Plastic syringe manufacturers pay more attention on syringe quality, and what do they do to detect the control?

60ml oral paste syringe

First the surface of veterinary oral gel syringe needs visual inspection, the surface has uniform colour and iustre, and smooth surfae. The inner wall of the needle is smooth and uncorrugated. The syringe head is smooth and no influence on printing.

plastic oral paste syringe

Second, the lifting force of veterinary oral gel syringe shall be between (4.0-4.5) N. plunger and putters need interwork. The piston is fully lubricated by silicone oil and syringe is filled with half water, insert the protective cap on the perfusion device, slowly pull back the 3mm distance. The putter should be stable and should not be separated from the piston. Once again push the piston top to apply the axial pressure 30N, hold for 30 seconds, the filling cap seal and the piston seal should be free of leakage.Push the piston into the whole syringe of the whole syringe with a putter, and the push-rod piston should be smoothly moved, and there should be no sudden pause from the 1.5m height to the horizontal rigid smooth surface. The infusion device should not be broken.

13ml  udder injector for cattle and dariy

All above is just physical detection for veterinary oral gel syringe, every plastic syringe manufacturer is different, but the physical inspection is the most comprehensive and specific.

How Can Silica-gel Desiccant of Plastic Vitamin Tube Keep Dry?

Plastic vitamin tube is used in vitamin tablet packaging due to its dry environment. There are silical-gel desiccant and large molecular sieve desiccant in plastic vatimin tube. However, silica-gel desiccant is the only one through FDA and healthy for human.

 

desiccant closure

Silica-gel desiccant in vitamin tube is a highly active adsorbent material, which belongs to amorphous material. Silic-gel desiccant of vitamin tube cap insoluble in water, non-toxic and tasteless, chemically stable. According to diameter, silica can be divided into macroporous silica gel, coarse - hole silica gel, type B silicone, fine - hole silica gel. Silica can reuse through rebirth. The main ingredient of silica-gel desiccant is Sio2, for more translucent amorphous, composed of natural mineral processed granular or bead, usually after treatment with sulfuric acid to form, its hard, non-toxic, tasteless, non-corrosive, good chemical stability and thermal stability.

plastic vitamin tube

  

Silica-gel desiccant of vitamin tube covers many hydroxyl groups with strong hydrophilicity, at the same time, the surface of silica gel desiccant has many small holes that are not visible to the naked eye, so that its surface area is greatly increased, and the properties of silica gel desiccant decide to become a good desiccant.Desiccant moisture environment as temperature of the shelf life is most suitable for 20 ~ 32 ℃.

Xinfuda as a China major effervescent packaging manufacturer with DMF, which can offer excellent desiccant packaging for vitamin tablets. Plastic vitamin tube adopted silica-gel desiccant to keep dry and the spring on the cap can prevent tablets damaging.

Here are the fake rabies vaccine inactivated, which vaccine vial factory do you use?

The fake rabies vaccine inactivates the seedling packaging mostly use vaccine vials, although the series of fake rabies vaccine inactivates is relatively few, inactivated seedlings also play an important role in the later purification of pseudo rabies, so the bottle packaging is more important.The main packaging now is plastic vaccine vials.

plastic injection vaccine bottle

According to the data of domestic vaccine factories using, The fake rabies vaccine is basically half the world, and unlike the vaccine competition, Vaccine bottles but present a peaceful, in the small make up the spirit of mining, four product packaging should all connected with a manufacturer, can be seen as a vaccine makers, there is only the product competition, packaging are all unwilling to take risks, or in certain manufacturers.

How to Solve The Heated Sterilization of Bottle?

High-temperature liquid bottle has always been a veterinary medicine oral liquid soft rib of the manufacturer, the product in the veterinary market is relatively high profits, product line is also in line with their own conditions, but the microbial this repeatedly hitting the market. Using sterile line, the cost of investment is too high, and the final sterilization plastic packaging is often the problem of deformation, leakage and so on. The use of glass packaging goes back 10 years. Today the high-temperature oral liquid bottle finally has a qualitative leap.

 

250ml high temperture resistant sterile bottle

Based on the analysis of the experts in veterinary medicine, the plastic bottle technician, the mould technician, the production of high work, etc., finally introduced the Korean imported musical equipment. And develop the mold that meets the requirement, supporting machinery. Molding of the high temperature resistant oral liquid bottle, appearance and fine luster, uniform wall thickness, bottle bottle smooth level off, the most important thing is that the product sterilization 124 degrees 30 minutes after filling, bottle overall appearance properties will not change. The technology is far higher than the national standard, which was launched two years later in huizhong and the Chinese expeditionary force.

Currently, the specifications of such products cover a range of 250ml, 500ml, and can be used in other doses. The animal's oral liquid will become mainstream again in the current animal products.

Child Resistant Cap Bottle Spring is Coming

Child resistant cap bottle is designated as capsule packaging, however, there isn’t any compulsive demand in desmostic. Recently Shanghai food and drug administration was released on August 15 about ‘ carry out the notice of special inspection on the operation of the Chinese medicine pills’ opened a new round of traditional Chinese medicine to supervise the war. The Child resistant cap bottle is back to the drug factory.

child resistant cap bottle

 According to statistics, in February this year so far, just six months, national food drug safety administration has 12 times the cumulative exposure of 375 Chinese medicine enterprises of 419 batches problems substandard Chinese medicine yinpian, origin of anhui, hebei, sichuan, guangxi, etc.Packaging industry insiders believe that the thorough examination of the traditional Chinese medicine will speed up the packaging of the world.

From the perspective of production and processing, the origin, harvest, processing, production environment and technical conditions of the medicine will influence the quality of Chinese medicine.The packaging bottle bears the double pressure of drug storage and efficacy, and nature plays an important role in this pharmaceutical industry.

200g plastic medicine bottle with child resistant cap 

 

Pharmaceutical factory of scrutiny will inevitably affect the cartridge development of enterprise, is the trend of the future will present formal development would like international packaging enterprise, unqualified enterprises will gradually fade out the market, and in the past years of precipitation, child resistant cap bottle would dominate tablet bottle packing market, as a real tablet packing boss occupy the world market.The packaging industry will usher in a new round of change!

Where Dose Xinfuda attract Bimeda？

On September 6^th 2017, chief executive officer of Bimeda Donal Tierney, Asian region CEO Ronan Smith and Chinese responsible person went to Xinfuda for a filed inspection. They have a high evaluation for our company’s general strength, especially for production quality management system of plastic veterianry syringe and plastic vaccine bottle.

Ireland Bimeda Inc is the world's top 10 multinational animal medicine and health care products manufacturer. Bimeda commission say that they inspect globle pharma packaging manufacturers every year, among the suppliers, Xinfuda has advanced production line. From raw material to product inspection and warehousing, whether the key point controlling or employee's operating rules and quality management maturity, which has reached international level.

Ronan Smith had a detailed understanding of the production process of pre-filled syringe. The site has reached a cooperation intention, and the details of the cooperation will be further discussed in November.

What Should You Pay Attention on Choosing Vitamin C Tube?

Vitamin C tube belongs to a special packaging in the international, which has strong professionalism. The sealed fitting of bottle body and cap is important for avoiding vitamin C tablets wetting. It is the key step for vitamin C tablet manufacturerto choose suitable packaging.Except sealing, there are also some points need to pay attention.

effervescent tablet  tube

First, surface: Color uniform, no damage, no oil, good match.

Second, the moisture content of the drying agent:lower than 4.8%.

Third, anti-fall: desiccant must not be dropped

Fourth, board: moisture content below 6%, no fluorescence reaction, heavy metal less than 5 parts per million.

Fifth, dissolution: heavy metals, oxides and non-volatile substances.

Sixth, microorganisms: bacteria less than 1000, mould yeast less than 100, escherichia coli may not be detected.

Seventh, abnormal toxicity should not be detected.

144mm effervescent tablet packaging 

Vitamin C tube has an important part is that spiral desiccant cap, spiral desiccant cap is the international univerisal cap for effervescent tablets, the structure has high requirement for mould design, even some countries can not volum production. The spiral in the cap can buffer the impact of the transport process, thus protecting fragile effervescent tablets will not be damaged.

The selection of high-quality vitamin C tube will also need to analyze the strength, equipment and comprehensive quality of the manufacturers, and the high quality of the enterprise products will be stable, which will help your products to be more smooth in the competition.

Child Proof Medicine Bottles for Sale

Child proof medicine bottle is widely used in pharmaceutical packaging, due to its safety for children. Child proof bottle is made of PE or PP raw material. Child proof medicine bottle cap can be opened through pushing and turning, which can keep children safe.

child proof medicine bottle

Pharmaceutical bottle has through DMF and its No.:30256, the volume is 45ml to 250ml, which can contain capsule and tablet. Child proof medicine bottle adopts double-canopy structure,inner cap and thread of bottleneck connected, cover and inside links,it need external force to press the cover and turn to open .It can effectively prevent children open bottle caps.It is convenient for adult to open and cap structure is simple.

Child proof medicine bottle manufacturer in China, Xinfuda Medical Packaging can offer you functional packaging.

China Plastic Syringe Supplier

Plastic syringe including many forms like disposable syringe, paste syringe, injection syringe, dial a dose syringe.

veterinary syringe

Plastic syringe is mainly made of barrier, plunger, loop and tip, some small volume syringe also contact with needle. Plastic syringe can not only serve as liquid drug container, but also act as syringe using.

60ml dia a dose syringe

Recently, injection drug packaging mainly used schering bottles or ampule, usually used syringe when smoking into the syringe. Prefilled syringe concept comes from European developed countries, and it is has been more than 30 years history. Liquid drug directly filling in the syringe and storage, when using simple and convenient, high-quality syringe components have good compatibility with drugs, and the syringe itself has good sealing, drugs can be stored for a long time. Another product push rod can be printed on the scale, convenient and accurate medication, in the field of injection drugs packaging, plastic syringe can be in automatic filling line for liquid filling, greatly made liquid filling and use.