know more about plastic syringe

First of all, the current perfusion device is mainly made of glass material and plastic material. The plastic perfusion device is gradually replacing the glass syringe. The main cost is lower, the safety is higher than that of the glass syringe, and it is not easy to be broken. The production process of the perfusion device itself is relatively advanced, and the infusion device is generally produced by an injection molding process. The products produced by the injection molding process are molded at one time without any scraps, and the products are accurate in size and uniform in weight.

plastic syringe

Secondly, the sealing requirements of the perfusion product are high. When selecting the perfusion device, the sealing property should be tested. Half of the water is injected into the perfusion device, the piston is inserted into the syringe, the protective cap is removed, and the residual air is removed. Block with the cap and apply an axial pressure of 30 N on the pusher plug inside the syringe through the push rod for 30 seconds. There should be no leakage at the cap seal and the piston seal.

Third, the plastic syringe must be guaranteed to be sterility due to direct contact with the drug. Generally, the syringe should be produced in a clean workshop that meets national standards. In addition, in order to ensure sterility, if the veterinary drug manufacturer has higher sterility. Additional requirements for ethylene oxide sterilization or cobalt 60 irradiation sterilization are required.

know more about plastic syringe

First of all, the current perfusion device is mainly made of glass material and plastic material. The plastic perfusion device is gradually replacing the glass syringe. The main cost is lower, the safety is higher than that of the glass syringe, and it is not easy to be broken. The production process of the perfusion device itself is relatively advanced, and the infusion device is generally produced by an injection molding process. The products produced by the injection molding process are molded at one time without any scraps, and the products are accurate in size and uniform in weight.

plastic syringe

Secondly, the sealing requirements of the perfusion product are high. When selecting the perfusion device, the sealing property should be tested. Half of the water is injected into the perfusion device, the piston is inserted into the syringe, the protective cap is removed, and the residual air is removed. Block with the cap and apply an axial pressure of 30 N on the pusher plug inside the syringe through the push rod for 30 seconds. There should be no leakage at the cap seal and the piston seal.

Third, the plastic syringe must be guaranteed to be sterility due to direct contact with the drug. Generally, the syringe should be produced in a clean workshop that meets national standards. In addition, in order to ensure sterility, if the veterinary drug manufacturer has higher sterility. Additional requirements for ethylene oxide sterilization or cobalt 60 irradiation sterilization are required.

Ceflonin breast injection (dry period) packaging choice!

Ceflorin is a semi-synthetic first-generation cephalosporin antibiotic, currently widely used in the EU and the Commonwealth of Commonwealth countries. It can be used to treat cows’ dry-mastitis and prevent new infections in the breast. Ceflonin has a broad antibacterial spectrum, has strong antibacterial activity against Gram-positive and Gram-negative bacteria, and has a good effect on β-lactamase-producing bacteria. Cephalonin-sensitive bacteria include golden yellow Staphylococcus, Streptococcus agalactiae, Streptococcus uberis, Streptococcus agalactiae, E. coli, etc.

The most commonly used packaging for pre-filled syringes as breast implants has the following characteristics:

1. More accurate doses of medicines During use, there are more residual medicines. Pre-filled syringes can minimize the residues of medicines and the doses are more accurate.

2. Direct injection, to avoid the staff from harming themselves during the dispensing process.

3. Convenient to use, no pollution: the pre-filled liquid medicine only needs to remove the needle cap and directly inject, there is no cross-contamination, the air can’t contact the medicine, and the injection is truly safe.

Ceflonin injection packaged with pre-filled syringes can not only effectively ensure the safety and stability of the drug, but also greatly save medication time. At the same time, soft-headed pre-filled syringes can also effectively reduce the damage to cow breasts.

Effervescent tablet packaging tube cap structure

The tube cap of the effervescent tablet is composed of a low-density polyethylene (LDPE) bottle cap skeleton, desiccant, and a cardboard.Desiccant is used to prevent moisture and mildew in medicine and food. Commonly used desiccants can be divided into physical adsorption desiccants and chemical adsorption desiccants. The silica gel desiccants in physical adsorption desiccants meet the US FDA standards and have been verified to be harmless to the human body. Silica gel desiccant physically adsorbs water molecules into its structure.

Effervescent tablet packaging tube use chemisorbent desiccants. Commonly used desiccants for chemical adsorption are quicklime, magnesium chloride, calcium chloride, soda lime, phosphorus pentoxide, etc., which absorb water molecules to change their chemical structure and become another substance. Molecular sieves are another commonly used desiccant. Molecular sieves are crystalline silicates or aluminosilicates, which are pores and cavities that are connected to each other by oxygen bridge bonds through silicon-oxygen tetrahedra or aluminum-oxytetrahedra. It can be used as efficient desiccant, selective adsorbent, catalyst, ion exchanger, etc. According to the size of the pore channel, molecular sieves with pore size less than 2nm, 2-50nm and more than 50nm are called micropore, mesopore and macropore molecular sieve, respectively.

The cap of the effervescent tablet packaging tube has a spiral plastic spring and the cardboard is used to isolate the desiccant from the medicine to prevent direct contact with the article. The spring can compress the tablet to prevent shaking. Desiccant is on the top of the lid to prevent accidental ingestion. The cap and the bottle are directly matched and sealed, and no gasket is required. The bottle body is mainly injection molding and injection blowing, and the capacity is generally less than 100ml. Can be printed according to customer requirements. Mainly used for testing paper, effervescent tablets easily absorb moisture.

Several key test items for the test paper bottle

The test paper tube mainly refers to the in vitro test strip packaging container, which has strong professional characteristics and guarantees the validity of the test paper. Therefore, the sealing of the bottle body and the bottle cap has a great influence on protecting the validity period of the test strip in vitro. In addition to the sealing and moisture absorption rates, there are several points to be noted in the packaging of qualified test strips:
1. Appearance: uniform color, no damage, no oil, good cooperation
2. Desiccant moisture content: less than 4.8%.
3. anti-drop: desiccant should not spill.
4. Cardboard: The moisture content is less than 6%, there is no fluorescence reaction, and the heavy metal is less than 5 parts per million.
5. the dissolution: heavy metals, easy oxides, non-volatiles.
6. microorganisms: bacteria less than 1000, mold yeast less than 100, Escherichia coli can not be detected.
7. abnormal toxicity can not be detected.
Caps of test strips packaging play a key role - with an integrated desiccant design that helps customers reduce overall costs. The clamshell seal increases consumer appeal and is ergonomically designed to encourage consumers to close the seal and extend protection. Different types and amounts of desiccant can be customized according to customer requirements.

What should you pay attention to when using the syringe?

The perfusion device is generally made of polyethylene material, and its structure is mainly composed of a sleeve, a push rod, a piston, a positioning ring and a protective cap. The perfusion device is mainly sterilized by an ethylene oxide sterilization device, and is sterile and pyrogen free. This type of syringe can be filled with liquid in advance, which is convenient and quick to operate. The veterinary drug market continues to increase its demand!

Note the following when administering with a syringe:
First, you should pay attention to whether the syringe is clean and the package is damaged before using the syringe.
Second, whether the pre-filled drug in the perfusion device is degraded, and whether the drug solution exceeds the expiration date;
Third, whether the syringe use site is disinfected after several injections before injection;
Fourth, take corresponding measures according to the situation of sick animals;

New requirements for candy tablet packaging of health products - moisture-proof drying

The health care candy tablet refers to the health care product produced by the candy tableting process, usually generally a tablet. The purpose of the tableting process for health care products is to make the health care products tablets have a better taste and improve the user's eating experience.

At present, the candy tableting industry is gradually adopting moisture-proof dry bottles. This kind of packaging has good sealing performance and integrates desiccant into the bottle cap, which can effectively prevent the tablets from contacting the desiccant and can achieve the purpose of absorbing water molecules, so as to keep the packaging drying inside.

The health care candy tablet packaging tube cap has a small store box to store the desiccant which can prevent the candy tablet from moisture.The desiccant is on the top of the lid, and the lid is directly sealed with the tube body without the need for a gasket. The cap is made by injection molding, and the bottle body is injection-blasted. The general capacity is less than 100ml. Printing can be done according to customer requirements.

The new effervescent tablet packaging caps are designed with an integrated desiccant to help customers reduce overall costs. The clamshell seal increases consumer appeal and is ergonomically designed to encourage consumers to close the seal and extend protection.